APPLICATIONS · GRAFFITI PROTECTION
Graffiti Protection
A permanent, non-sacrificial coating that stops graffiti and fly posters from ever bonding to the surface.
One coat, applied once. Graffiti and posters wash away with water and detergent, with no ghosting residue and no need to recoat.
Made in the UK, in collaboration with Germany
PERMANENT
One coat applied once. The protection stays on the surface for the life of the finish.
EASY CLEAN
Graffiti lifts off with water and detergent. No harsh chemicals, no ghosting residue.
VANDAL RESISTANT
Paint, permanent markers and fly posters cannot bond, so surfaces shrug off attack.
THE DIFFERENCE
Graffiti that simply will not stick.
GSR 7626 Graffiti Protection forms a flexible, breathable barrier that paint and markers cannot grip. It bonds strongly to almost any surface, from masonry and brick to metal, wood and plastics, and it resists all paints, permanent markers and most acids.
PRODUCT RANGES
Protection and clean-up, together
X-Stain Remover
For stubborn marking that needs more than a wipe, GSR X-Stain Remover lifts stains safely and cleanly.
Ceramic Coat
A nano ceramic barrier for hard surfaces, adding a tough, easy-clean finish on top of everyday protection.
TECHNICAL SPECIFICATION
7626 Graffiti Protection, in numbers
| Property | Specification |
|---|---|
| Colour | Clear and pigmented liquid |
| Dilutable | No |
| Application | Brush, roller or airless spray (not conventional HVLP). Airless: 16 thousand size tip or higher. Cleaning: white spirit |
| Volume Solids | 78% matt; 78% gloss; 48% pigmented |
| Recommended Film Thickness | 50 to 80 DFT depending on substrate and porosity |
| Coverage Rate | 6 to 8 square metres per litre on a smooth surface with a fine pile 4 inch roller, giving roughly 70 microns of coating. A thicker coat at around 130 microns lasts longer. Porous surfaces such as brick and stone need a wet film thickness of 150 microns, drying back to around 115 to 120 DFT |
| Breathable | Yes |
| Urine-resistant | Yes |
| Paintable | Only with the pigmented 7626, not with standard paints |
| Drying Time | Touch dry in 3 to 4 hours; full cure in 24 hours. Recoat after 3 to 4 hours if required |
| Thinners / Brushwash | Disposal |
| Weight Per Litre | 0.90 to 1.02 |
| Flash Point | Above 64°C |
| V.O.C. | 50 grams per litre |
| Viscosity | 76% high solids |
| Finish | Gloss to semi matt |
| Gloss Reading | 62 to 68 at 60 degree reflectance angle |
| Application Temperature | -5°C to +60°C; all surfaces must be clean and dry |
| Temperature Resistance | -40°C to +50°C |
| Storage Temperature | +5°C to +25°C, out of direct sunlight |
| Shelf Life | 1 year |
| High Pressure Cleaner | Max 80 bar at 30 to 40 cm distance with a flat jet nozzle, working from the outer edge of the graffiti |
| Surface Preparation | All surfaces must be clean and dry. Repaint any heavily marked painted surfaces with good quality masonry paint before application. The rougher the surface, the better the bonding |
| Bundle (Art. No.) | 5 litre canister (7626); 20 litre canister (7626-20) |
| Water Vapour Permeability | Class V2 to EN ISO 7783-2 |
| CO2 Permeability | More than 50m to EN ISO 1062-6 |
| Fire Rating | Class 1 to BS 476 Part 7; Class 0 to BS 476 Part 6 |