APPLICATIONS · STONE, MARBLE & CONCRETE
Coatings for Stone & Concrete
Breathable, long-lasting protection for natural stone, marble, concrete, brick and plaster, indoors and out.
Coatings that seal out water, stains, moss and graffiti while letting surfaces breathe. From penetrating stone protection to glossy topographical finishes, there is a system for every surface.
Made in the UK, in collaboration with Germany
BREATHABLE
Surfaces keep releasing moisture, so damp, mould and efflorescence have nowhere to build up.
LONG-LASTING
Durability from two years up to twenty, with frost, oil and acid resistance built in.
EASY CLEAN
Wine, lemon juice and everyday dirt sit on the surface instead of soaking in, so cleaning takes seconds.
THE DIFFERENCE
Stone protection that lets stone breathe.
Porous surfaces soak up water, dirt and stains, and that is where the damage starts. Our coatings seal the surface without trapping moisture, hold up against acid and alkaline attack, and keep stone, marble and concrete looking the way they should for years.
PRODUCT RANGES
Coating systems for every surface
Stone Penetrative
A penetrating stain protector for concrete, brick, sandstone, limestone and natural stone, with extreme abrasion resistance and a breathable finish that lasts 10 to 20 years.
Multi Stone/Wood
A topographical coating for concrete, plaster, natural stone, roof tiles and wood, available in gloss or matte, with good coverage of 20 to 100 m² per litre.
X-Stain Remover
Lift set-in stains from stone and concrete before recoating, so the fresh layer bonds to a clean surface and performs at its best.
STONE SYSTEMS
Stone coating systems compared
| Property | Stone Penetrative | Multi Stone/Wood |
|---|---|---|
| Best for | Concrete, brick, limestone, sandstone, natural stone, facades | Concrete, plaster, natural stone, roof tiles, wood |
| PFAS-free | Yes | Yes |
| Application | Spray, brush, roller | Spray, brush, roller |
| Coverage | 8-50 m² per litre | 20-100 m² per litre |
| Durability | 10-20 years | 5+ years |
| Curing time | 3-6 hours at 20°C | 24 hours |
| Finish | Penetrative, may slightly darken | Gloss or matte |
| Breathable | Yes | No |
| Frost & oil resistant | Yes | Yes |